background image

Red 12+ to Wiegand Controller

Black 12- to Wiegand Controller

Green Data 0 to Wiegand Controller
White Data 1 to Wiegand Controller

Ground/Drain

For Green LED control

For Red LED control

For Site Code Modification

Manual Type 6.4.0.7-RF

TES2 

with Essex Wiegand Keypad

For Models

400-W-TES2          401-W-TES2
403-W-TES2          404-W-TES2  
410-W-TES2          411-W-TES2               

Specifications

INSTALLATION

INSTRUCTIONS

501 E. Goetz Ave.

Santa Ana, Ca 92707

www.eholovision.com

Ph. 714-434-6904

Fax 800-362-0002

HOLOVISION

400 Series “W” Junction Board

Not Used

Connect tamper switch to alarm (optional)

Intercom to TES2 (Not polarity senitive)

Access Control

Essex KPT-26TI 26 bit Wiegand Keypad
TES2 can open 2 doors with optional T-RLY

Communication

TES2 telephone entry system provides a
communication link between the front door and every
phone in the house. When the button is pressed, the
phones in the house will ring with a distinctive ring. 

The home owner can then speak to the visitor by answer-
ing any of the ringing phones in the House.  TES2 is a 2
door system (front door, back door).

Summary of Contents for 400-W-TES2

Page 1: ...w eholovision com Ph 714 434 6904 Fax 800 362 0002 HOLOVISION 400 Series W Junction Board Not Used Connect tamper switch to alarm optional Intercom to TES2 Not polarity senitive Access Control Essex KPT 26TI 26 bit Wiegand Keypad TES2 can open 2 doors with optional T RLY Communication TES2 telephone entry system provides a communication link between the front door and every phone in the house When...

Page 2: ...y for the system to work See note No CO operation The connection between the main board and the speaker board is polarity sensitive Please note the connection shown No Ring Jumper House Telephones CO Line In To House Phones Door 2 Door 1 T1 R1 T2 R2 No Co Jumper Use jumper in exernal phone line is not used NC1 C NO1 NC2 C NO2 T Relay Board optional Door 1 Door 2 J3 J4 J6 ...

Page 3: ...ion would be used if the homeowners used cell phone only no house phone line In this case several phones would be required throughout the house These phones would be used only for answering door phone calls 2 For NO CO option install 2 jumper pins if J3 J4 at th bottom of the board TES2 is shipped with this option disabled Set No CO Line Option TES2 is shipped with this option DISABLED Step Action...

Page 4: ...built in call waiting If the house phone is in use when the door button is pushed the caller will receive a call waiting tone To answer the door call simply flash to answer the door call and flash again to return to the original call SWITCH TO OTHER DOOR Users can switch to the other door station at anytime by hitting 1 or 2 while connected to door 1 or door 2 Operation of T RLY If the TES2 Relay ...

Reviews: