RTS CLD Color Keypanel Family DKP 16 CLD User Manual Download Page 42

Page: 42 / 160

NOTE:

All four (4) mics cannot be enabled at the same time. If three (3) mic sources are turned ON, the external panel

mic is not available. For example, if the front panel mic, the front headset mic, and the rear headset mic are
configured as

Always ON

, the external panel mic is not available.

Speaker

Front and Rear

Front

Rear

Front

Rear

Front

Front and Rear

No icons display on the keypanel.

Headset

Front and Rear

Front

Rear

Front

Rear

Front

Front and Rear

No icons display on the keypanel.

TABLE 5.

Source Configuration Matrix and Display icons

ALWAYS ON/ENABLED

SWITCHED

DISABLED

ICON DISPLAYED

Summary of Contents for CLD Color Keypanel Family DKP 16 CLD

































































































































































Search results

Summary of Contents for CLD Color Keypanel Family DKP 16 CLD

Reviews:

Related manuals for CLD Color Keypanel Family DKP 16 CLD

Brands by name

Popular brands

RTS CLD Color Keypanel Family DKP 16 CLD, User Manual

Search results

Summary of Contents for CLD Color Keypanel Family DKP 16 CLD

Reviews:

Related manuals for CLD Color Keypanel Family DKP 16 CLD

Brands by name

Popular brands