RTS CLD Color Keypanel Family DKP 16 CLD, User Manual

Page: 118 / 160

112
6.
Using the 3(
↑
) or 6(
↓
), select the baud rate you want to use.
A blue arrow appears next to the option currently selected .
7.
Press the SEL button.
Service Menu, Display Dim
Display Dim displays the percentage of brightness of the keypanel display.
This value can range from 35% brightness up to 100% brightness (set in increments of 5).
By default, the keypanel brightness is set to 40%.
You can configure this option one of three ways:
All Panels - allows you to set the brightness for all panels connected to the keypanel.
Expansion - allows you to set the brightness for only the main keypanel. You can set the brightness for the left display
window, the right display window, or both display windows.
Main Panel -allows you to set the brightness for only the main keypanel. You can set the brightness for the left display
window, the right display window, or both display windows.
To set the display brightness on all panels , do the following:
1.
On the KP 32 CLD keypad, press MENU .
The Top Level menu appears .
2.
Using the 3(
↑
) or 6(
↓
)
,
select Service .
3.
Press the SEL button.
The Service submenu appears in the display window.
4.
Using the 3(
↑
) or 6(
↓
)
,
select Display Dim .
5.
Press the SEL button.
The Display Dim submenu appears .
6.
Using the 3(
↑
) or 6(
↓
)
,
select All Panels .
Brightness: [X]% (where X represents a number from 35 to 100) appears in the display window.
7.
Using the scroll arrows , adjust the brightness (35% to 100%) you want the keypanel display.
8.
Press CLR to exit the menu system.
FIGURE 113.
Service Menu - Baud Rate Selection