Ross Synergy MD, Engineering Manual, Page: 90 / 388

3–26 • Physical Installation Synergy Q/MD Engineering Manual (v9.1 MD)
Power Failure
When the Synergy Q/MD switcher loses power, the frame and control panel react in the following
fashion:
• A loss of control panel power only has no effect on the frame, because the frame stores
the current video state. When control panel power is restored, your setups will return to
their previous state.
• If the frame is turned off, the panel indicates a frame power failure on the
POWER
FAIL
indicator LEDs. In addition, the control panel menu displays the Splash Screen.
When frame power is restored, the power failure status indicator clears, and the panel
returns to the main menu with all control panel settings in factory default state. Refer to
the section “
Preliminary Functional Check ” on page 4-16 for factory default settings.
• When power returns after a loss to both the frame and the control panel, control panel
setting will return to the factory default state. Refer to the section “
Preliminary
Functional Check ” on page 4-16 for factory default settings.
Note Refer to the section “ Important Regulatory and Safety Notices to
Service Personnel ” at the front of this manual for correct line cord
information.