Ross Synergy MD, Engineering Manual, Page: 257 / 388

Synergy Q/MD Engineering Manual (v9.1 MD) Custom Controls • 10–11
Programming Control Panel Functions
Use the following procedure to program a custom control button with basic functions:
1. Navigate to the Custom Controls Menu 1-2 as follows:
• Press HOME B Custom Controls .
Custom Controls Menu 1-2
The Main Area provides the status of the Custom Control buffer, as well as the name
and status of the custom control selected on the menu. If you have already programmed
one or more macros, a percentage value is displayed that indicates how “full” the buffers
are.
The Scroll Area provides lists of the enabled banks, and a full list of custom control
buttons. Not all of the custom control buttons exist on every control panel.
2. Select the Custom Control bank and button that you want to record to as follows:
• Use the Bank knob to select the custom control bank that you want to record the
custom control on.
• Use the Button knob to select the custom control button that you wish to program.
You can also press the button directly on the panel.
Important
Memory recalls from custom controls will override the current Effects
Dissolve, Keys Only, and Auto Recall settings to whatever settings
were in place when the custom control was recorded.
Note
Buttons with an asterisk ( * ) next to them in the list are already
programmed, however, they can be edited. Refer to the section
“
Editing Custom Control Macros ” on page 10-42 for details.