manualshive.com logo in svg

Ross Synergy MD, Engineering Manual, Page: 161 / 388

Share
Download
Ross Synergy MD Engineering Manual Download Page 161

Synergy Q/MD Engineering Manual (v9.1 MD)

Software Upgrades and Options • 6–25

Viewing a Port Monitor File

Port Monitor files can be viewed directly from the Web Interface via the 

Port Monitor File Browser

.

Use the following procedure to view a port monitor file:

1. In the 

Port Monitor File Browser

, click on the port monitor file you wish to open.

The Port Monitor file is displayed in the Web Interface.

Port Monitor File Example

2. Click

 Port Monitor Files 

to return to the 

Port Monitor File Browser

 and choose 

another port monitor file to view.

This completes the procedure to view a port monitor file. 

Deleting Port Monitor Files

Port Monitor files may be deleted from the Web Interface.

Use the following procedure to delete a port monitor file from the 

Port Monitor File Browser

.

1. On your computer, open your Web Browser and, in the address bar, type in the IP 

address of your switcher, with the addition of /cgi-bin/pmbroswer to display the 

Splash 

screen 

and the 

Synergy MD/X Web Interface Login Window

.

For example, enter 

10.0.2.200/cgi-bin/pmbrowser

.

2. In the 

Name

 field enter the Synergy MD/X Web Interface user name.

3. In the 

Password

 field enter the password.

4. Click 

OK

 to start Synergy MD/X Web Interface and display the 

Port Monitor File 

Browser

.

5. Click 

Delete 

beside the port monitor file you wish to delete.

Note

Port Monitor files cannot be copied and saved from the Web Interface. 
To save a local copy, copy and paste the content of the Port Monitor 
file into a text editor.

Note

Stopping and restarting the streaming process will overwrite the 
existing port monitor files.

Note

If you do not know the user name or password contact your IT 
department or Ross Video Technical Support.

Summary of Contents for Synergy MD





































































































































































































































































































































































































Reviews:

No comments