Ross Synergy MD, Engineering Manual, Page: 242 / 388

9–16 • Basic Communications Setup Synergy Q/MD Engineering Manual (v9.1 MD)
10. Press
Extra Options
to display the Extra Options Menu .
Communications — Extra Options (Rate) Menu
11. Assign an update rate to the tally interface as follows:
• Use the
Com Port
knob to select the tally interface you are setting the rate for.
• Use the
Option
knob to select
Rate
.
• Use the
Value
knob to select the rate, in fields, between update messages sent by
the switcher to the tally interface equipment. The default value of
26
is the
recommended setting, but you can choose any value between
2
and
60
, inclusive, if
you desire.
Communications — Extra Options (Data Transfer) Menu
12. Assign a data transfer size to the tally interface as follows:
• Use the Com Port knob to select the tally interface you are setting the message
size for.
• Use the
Option
knob to select
Data Txfr
.
• Use the
Value
knob to select either
Minimal
,
Normal
or
Complete
as the
message size protocol for the tally interface.
Complete
is the recommended setting
for this option.
Communications — Extra Options (Start) Menu