Ross Synergy MD, Engineering Manual, Page: 164 / 388

6–28 • Software Upgrades and Options Synergy Q/MD Engineering Manual (v9.1 MD)
Panel Boards Menu
Use the following procedure to display information on the installed Panel Boards:
1. Navigate to the Installed Options Menu 1-2 as follows:
• Press
HOME B MORE B Setup B Installed Options
.
2. Press
Panel Boards
to display the Panel Boards Menu .
Installed Options — Panel Boards Menu
The main area provides three columns of information that pertain to the boards installed
in the panel:
• The
Board
column lists each circuit board by part number and name.
• The Rev column lists the hardware revision number of each board.
• The
FPGA Rev
column lists the software revision number of each board.
This completes the procedure for displaying information on control panel boards.
Frame Boards Menu
Use the following procedure to display information for all installed Frame Boards:
1. Navigate to the Installed Options Menu 1-2 as follows:
• Press
HOME B MORE B Setup B Installed Options
.
2. Press Frame Boards to display the Frame Boards Menu .
Installed Options — Frame Boards Menu
The main area provides five columns of information that pertain to the boards installed
in the frame:
• The
Slot
column lists each slot on the frame. The slots at the back of the frame are
identified with letters (
A-E
), and the slots at the from of the frame are identified
with numbers (
1-4
).
• The
Board
column lists each circuit board by name, including any daughter cards
that may be installed on that board.