manualshive.com logo in svg

Ross Synergy MD, Engineering Manual, Page: 361 / 388

Share
Download
Ross Synergy MD Engineering Manual Download Page 361

Synergy Q/MD Engineering Manual (v9.1 MD)

SmartConversion™ • 13–11

Use the following procedure to specify the output video format of an up/down converter:

1. Set the output video format on your up/down converter. Refer to the documentation for 

your specific up/down converter for details on how to configure video conversion 
settings.

2. Navigate to the 

SmartConversion Menu

 as follows:

•

Press 

HOME

 

B

MORE

 

B

Setup

 

B

Installation

 

B

Aux Bus

 

B

SmartConversion

.

3. Press 

Converter Formats

 to display the 

Converter Formats Menu

.

Converter Formats Menu

4. Specify an output video format for an up/down converter connected to an Aux Bus as 

follows:

•

Use  the 

Aux Bus 

knob

 

to select an Aux Bus you have connected to an up/down 

converter.

•

The 

Converter Input Format

 knob mirrors the setting you made in the 

Aux Bus 

Format Menu

. Ensure that it is set to the proper input video format for your 

up/down converter.

•

Use  the 

Converter Output Format 

knob to select the video format provided by 

the up/down converter connected to the Aux Bus selected above.

The middle section of the menu screen shows a summary of your settings. As you use 
the 

Bus

 knob to scroll through the various Buses, their settings will be displayed in this 

area of the menu screen.

The 

Converter Input Format 

knob mirrors the setting you made in the section 

“

Configuring Aux Bus Output Formats

” on page 13–7.

The 

Converter Output Format 

knob will override (but not mirror) the setting you 

made in the section “

Configuring Inputs

” on page 13–8. If you use this knob, the input 

format you set in the 

BNC Type Menu

 will be ignored.

Important

Ensure that you specify the correct video format for each up/down 
converter. Setting the video format to something other than the video 
format provided by the up/down converter can have unpredictable 
results.

Important

You can select from any of the output formats supported by the 
Synergy Q/MD switcher but be sure that you select a video format 
compatible with your reference video format. Refer to the section 
“

Reference

” on page 11–26 for information on video formats and 

reference settings.

Summary of Contents for Synergy MD





































































































































































































































































































































































































Reviews:

No comments