Ross Synergy MD, Engineering Manual, Page: 293 / 388

Synergy Q/MD Engineering Manual (v9.1 MD) Custom Controls • 10–47
Copying or Moving Custom Controls
When a custom control has been programmed, the commands in that custom control can be copied, or
moved, to any other custom control on the switcher. This allows you to duplicate custom controls on
different banks, or re-organize the custom controls.
Use the following procedure to copy or move a custom control:
1. Navigate to the Manage Custom Controls Menu as follows:
• Press HOME B Custom Controls B Copy/Move Macros .
Manage Custom Controls Menu
2. Use the
Source
knob to select the custom control you want to copy or move. The name
of the custom control is followed by the bank the custom control is on, and the number
of the custom control.
3. Use the
Destination
knob to select the custom control that you want to copy, or move,
the source custom control to. The name of the custom control is followed by the bank the
custom control is on, and the number of the custom control.
4. Copy a custom control as follows:
• Press
Copy
to copy the source custom control to the destination. Both custom
controls will contain the same commands.
5. Move a custom control as follows:
• Press
Move
to move the source custom control to the destination. The commands in
the source custom control are moved to the destination. The source custom control
will be empty after the move.
This completes the procedure for copying or moving a custom control.