Ross Synergy MD, Engineering Manual, Page: 334 / 388

11–32 • Additional Installation Setups Synergy Q/MD Engineering Manual (v9.1 MD)
Recalling Factory Default Settings
This section provides instructions for resetting the switcher to factory default values. These values are
preset at the factory, and cannot be overwritten by the user. Typically, once all of your switcher setups
and configurations have been completed and successfully stored on disk, you will not need to perform
this step.
However, you may need to recall one (or more) set of default values in the following situations:
• If you sense a problem within one of the register categories
• If you feel the need to restart a series of setups or configurations from a base default
setting
• If you wish to clear out a set of registers (e.g., resetting all memory registers to zero)
• If you wish to reset all control panel values
Switcher default values fall into eight categories of registers.
• Personality Registers
This set of registers stores default values for user-configurable areas. When reset, the
following areas will return to factory default values:
• Memory Registers
This set of registers stores default values for the Global Memory System and individual
MLE Memory groups. When reset, all memory registers are essentially cleared out (or
erased).
• Switcher Registers
This set of registers stores default settings for the control panel, similar to those
discussed in the “
Preliminary Functional Check ” section in Chapter 4. When reset, the
control panel (and all associated crosspoints, keyers, and MLE settings) is essentially
cleared to zero.
• Favorite CG Setup • All Preview Overlay
• Time Clock Direction • User Wipes
• Transitions (on which the Time
Clock resets)
• CG Mode, Channel and
file/folder settings
• Time Clock Reset Time • Double Press Rate
• Time Clock Position • Memory Bank Cycle Max
• VTR Time Code Position • Memory Attributes
• Source ID Position • Matte Limit
• Mnemonics • Auto-Recall
• PIP-II Memory • DSK Cut
• Audio Transitions • S&T MD Button Pattern
• Preset Black • Panel Sleep Time
• Fade to Black • Bus Map Assignment