Ross Synergy MD, Engineering Manual, Page: 177 / 388

Synergy Q/MD Engineering Manual (v9.1 MD) BNC Configuration and Check • 7–7
Use the
Prev Start Pos
and
Next Start Pos
softkeys to move the cursor (highlight)
through the BNC name. The selected character will be the first one in the name to appear
in the display. This function is especially useful if you are using one of the large font
options.
8. To adjust the color that will appear in the mnemonic display, rotate the
Color
knob to
select from the following choices:
•
Standard
— Select this option to use the default mnemonic format as set from the
Personality Menu .
•
Green
— Select this option to use green as the display color.
•
Yellow
— Select this option to use yellow as the display color.
•
Orange
— Select this option to use orange as the display color.
•
None
— Select this option to use no background color for the display color.
The selected mnemonic display changes on the switcher when you exit the Installation
Menus .
9. When you have completed your mnemonic adjustments, press
Accept New Name
to
register the new display style in memory.
10. Repeat steps 3 through 7 for each additional mnemonic display that you want to adjust.
This completes the procedure for customizing the mnemonic display.
Setting Up BNC Types
The BNC Type Menu allows you to associate physical Input BNC connectors with input types . These
associations play important roles throughout the system, particularly with regard to filtering
subsequent BNC setup menus based on specific input types.
Use the following procedure to set your input types:
1. Navigate to the BNC Menu 1-3 as follows:
• Press HOME B MORE B Setup B Installation B BNC .
2. Press BNC Type to display the BNC Type Menu .
BNC — BNC Type Menu
Note If you exit the installation menus without first pressing Accept New
Name , an error message is displayed.
Note
During the procedure, refer to the
Input Type
column in your Input
Worksheet . These “types” will be entered on the BNC Type Menu for
each input connected to the frame.