Ross Synergy MD, Engineering Manual, Page: 192 / 388

7–22 • BNC Configuration and Check Synergy Q/MD Engineering Manual (v9.1 MD)
Use the following procedure to rename a bus map:
1. Navigate to the Edit Bus Maps Menu as follows:
• Press
HOME B MORE B Setup B MORE B Edit Bus Maps
.
2. Press
Rename Mapping
to display the Rename Mapping Menu .
Rename Mapping Menu
3. Enter (or edit) the desired bus map name as follows:
• Use the
Horizontal
knob to move the highlight horizontally.
• Use the
Vertical
knob to move the highlight vertically.
• Use the Space , Prev Letter , and Next Letter softkeys to edit the name as
required.
4. Press
Accept New Name
to conclude the process (if you decide you do not want to
change the name, press
UP ONE
to exit the menu without renaming the bus map).
This completes the procedure for renaming a bus map.
Copying a Bus Map
You can copy a bus map from one bus map location to another. This allows you to organize or group
your bus maps together.
Use the following procedure to copy a Bus Map:
1. Navigate to the Edit Bus Maps Menus as follows:
• Press HOME B Setup B More B Edit Bus Maps B Copy Map .
Copy Bus Maps Menu
Operating
Tip
A standard PS/2 keyboard can be used to perform the same actions as
pressing or rotating the
System Control buttons and knobs. Refer to
the section “ Using the Keyboard in System Control Menus ” on
page 5-5 for details.