Rigol DL3000 Series, User Manual

Page: 140 / 163

RIGOL Chapter 2 Front Panel Operations
2-110 DL3000 User’s Guide
Option Configuration
DL3000 series electronic load provides the following options:

LAN: Connect the load to the PC or the local area network (LAN) where the PC
resides to realize remote control.

Digital I/O: provides the trigger input and output function.

High Readback Resolution: improves the resolution of the instrument. The
readback accuracy improves from 0.001 to 0.0001.

High Frequency: provides the high frequency option. The slew rate increases
from 3 A/μs to 5 A/μs.

High SlewRate: provides the high slew rate option. The frequency increases
from 15 kHz to 30 kHz.
If you need any of these options, order them according to the Order No. available in
"Appendix A: Order Information", and then install the options according to this
section.
Press Utility to enter the system utility function interface. Then, press Option to
enter the option tab, as shown in Figure 2-60.
Figure 2-60 System Option Tab
In the system option tab, you can view the installation status of all options (Official,
Trial, Not Installed) and install the options.
To install an option, you need an option license (each instrument has a unique
license). The option license code is a 28-character string, which consists of English
letters and numbers. After you purchase an option, you will obtain a key (used for
obtaining the option license code). Then, you can install the license according to the
following steps.
1. Obtain an option license
(1) Log in to the RIGOL official website
(
www.rigol.com), click SERVICE

Software License Register to enter the "Registered product license
code" interface.