Rigol DL3000 Series, User Manual

Page: 126 / 163

RIGOL Chapter 2 Front Panel Operations
2-96 DL3000 User’s Guide
disable the log function.
Enable/Disable the Von Latch Function
The load provides the Von Latch function. You can set Von to control the sinking
function of the load, thus protecting the DUT. This function is applicable to the CC
mode, CR mode, and Battery test mode.
In the system setting tab, press the Up/Down arrow key to switch the parameter
focus to "Von Latch", and then press the Left/Right arrow key or use the knob to
enable or disable the Von Latch function.
Set the Screen Brightness
You can set the screen brightness by using the brightness slider label. Moving left
decreases the brightness; and moving right increases the brightness. The setting is
stored in the non-volatile memory, which will not be affected even if you restore the
load to its factory defaults.
In the system setting tab, press the Up/Down arrow key to switch the parameter
focus to "Brightness", and then press the Left/Right arrow key or use the knob to set
brightness.