48
Laser Seam Tracking System for Welding Automation. RF627Weld Series
RF627Weld [Revision 1.1.1] 03.08.2020
15.5.5.1.15. Template 15 "Lowest / Highest point"
Template 15 is intended to track the position of the lowest / highest part of the
profile, and to measure parameters of this part (height and width), and the inclination angle
of a flat part. The search position can be customized in the
Search
tab (see par.
).
By default, this template is in the mode for measuring the lowest part. In order to
measure the highest part, it is necessary to select
Inverse search
in the
Search
tab.
Constraints
Measurements
Parameters
-
·
Point (coordinates of the point set
by
Search position
)
·
Height
·
Width
·
Angle (inclination angle of a flat
area)
Minimum plane length –
The
minimum length of a flat area, from
which the measurement of a hill will
start.
Minimum hill height
.
Inverse search –
Invert the Y-
coordinate in order to measure the
hollows.
Search position:
·
Projection
·
Center of mass
·
Top
·
Butt center
