64
Laser Seam Tracking System for Welding Automation. RF627Weld Series
RF627Weld [Revision 1.1.1] 03.08.2020
To add the measurement type for a new template, select the required item in the
Add measurement
menu. The measurement types are described in par.
. The
program will display the added measurement type. Then you need to configure its
parameters:
When all template parameters are set, click the
CREATE
button in the upper right
corner of the window. A new template will be added to the template selection area.
In addition, there is another way to call the Template Wizard:
·
Open the
Select templates
window by clicking on
.
·
In the
Select templates
window, click on
.
15.6. "PROTOCOLS" tab. Working with welding robots
15.6.1. General information
The Riftek Lamia software offers the following protocols: Riftek P1, R691 USI,
Riftek P2, Riftek P3.
NOTE:
The Riftek P1 and R691 USI protocols cannot be used with the "Welding"
set.
In the PROTOCOLS tab, parameters and buttons are displayed in accordance with
the selected protocol. A detailed description of the protocols is given in the sections below.
Before using the Riftek P2 and Riftek P3 protocols, it is necessary to calibrate the scanner. The
calibration procedure is described in par.
15.6.2. Functional diagram
