RF627Weld [Revision 1.1.1] 03.08.2020
Laser Seam Tracking System for Welding Automation. RF627Weld Series
83
point into the last two registers (in a scanner coordinate system). Before the calibration or
after the failed calibration, conversion of a point to 3D is performed by using blank
conversion rules or incorrect conversion rules respectively, i.e. the scanner will send invalid
3D results in such cases.
16. Firmware update
The scanner firmware can be updated only on the scanner web page.
To update the firmware, go to the
Firmware update
tab.
·
Click
Choose File
and select the firmware file.
·
Click
Upload
to upload the selected file.
·
Click
Start
to start the update process. You will see:
If the IP address settings haven't been changed after completing the firmware update
process and restarting the scanner, the web interface will automatically reboot without
waiting for the timer to expire. If the network settings have been changed, the web interface
will reboot with the default IP address (192.168.1.30) after the timer expires.
17. Maintenance
Laser scanners are virtually maintenance free. As these are optical systems, they
are sensitive to dust and sputter on the front windows. Cleaning is best done with a soft
cloth. Do not use scratching cleaners or other aggressive media.
It is necessary to remove fingerprints from the windows, because fingerprints
degrade the quality of profiles.
In order to remove fingerprints or grease, clean the windows with 20 % alcohol and
soft paper.
