RF627Weld [Revision 1.1.1] 03.08.2020
Laser Seam Tracking System for Welding Automation. RF627Weld Series
55
15.5.5.2.5. Template 5 "V-groove weld"
Template 5 can be used for V-grooves as well as for U-grooves, J-grooves and
bevel grooves.
To select the tracking point, it is necessary to set the
Search position
in
the
SEARCH
tab (see section
).
The algorithm also calculates the height and width of the groove and the inclination
angle of a flat area.
Constraints
Measurements
Parameters
-
·
Point (coordinates of the point set
by
Search position
)
·
Height
·
Width
·
Angle (inclination angle of a flat
area)
Minimum plane length –
The
minimum length of a flat area, from
which the measurement of a hill will
start.
Minimum hill height
.
Search position:
·
Projection
·
Center of mass
·
Top
·
Butt center
