16
Laser Seam Tracking System for Welding Automation. RF627Weld Series
RF627Weld [Revision 1.1.1] 03.08.2020
Button
Name
Description
Save
configuration
Save settings to the flash memory of the scanner.
The exclamation mark means that the parameters have been changed, but
haven't been saved.
Load defaults
Restore the factory settings.
Important:
It is necessary to restart the
scanner after restoring the factory settings. Click the
Restart
device
button.
Restart device
Restart the scanner.
A detailed description of all settings is given in the User's Manual for Laser
Scanners RF627 Series:
https://riftek.com/media/documents/rf627/manual2019/2D_Laser_Scanners_RF62
15. Riftek Lamia software
The Riftek Lamia software starts automatically after the controller is turned on. For
the system without controller, the Riftek Lamia software must be installed on the PC or
laptop.
15.1. System requirements
System requirements:
·
Operating system Windows 7 and later, or GNU/Linux.
·
Video card and video card drivers, which support OpenGL 2.1 and later, or GLES
3.0 and later.
NOTE:
To avoid errors in the operation of the Riftek Lamia software, you must
install the latest video card driver provided by the manufacturer. If you need help to install the
video card driver, contact the manufacturer of the computer or the manufacturer of the video
adapter. RIFTEK does not assist in installing the graphics drivers and provides the
information in this document solely as advice for troubleshooting.
Radeon video card drivers:
http://support.amd.com/en-us/download
GeForce video card drivers:
http://www.geforce.com/drivers
Intel video card drivers:
https://downloadcenter.intel.com/product/80939/Graphics-
15.2. Installation
Before starting the installation process, read the following information.
The Riftek Lamia software is designed for 64-bit operating systems. To determine
the version of your operating system, refer to the System Properties window or to your
system administrator.
Download links:
Windows x64:
https://riftek.com/media/documents/software/lamia/LamiaInstaller_win_x86_64.zip
Linux x64:
https://riftek.com/media/documents/software/lamia/LamiaInstaller_linux_x86_64.zip
To start the installation process, you need to run the setup file:
·
LamiaInstaller_win_x86_64.exe, or
·
LamiaInstaller_linux_x86_64.run
When you run the setup file, the welcome window of the Setup Wizard appears. In
this window, you need to click
Next >
and follow the guidelines in dialog boxes of the Setup
Wizard.
