RF627Weld [Revision 1.1.1] 03.08.2020
Laser Seam Tracking System for Welding Automation. RF627Weld Series
25
Parameter
Factory value
Description
When this mode is enabled, the CMOS sensor processes a part of the
active area set by the
Window top
and
Window height
parameters.
The frequency of profiles increases inversely with the size of the region
of interest (
Window height
).
Auto positioning
OFF
Automatic control of the position of the region of interest. The region of
interest automatically moves within the working range of the scanner in
order to keep the profile image within the boundaries of the specified
area. This mode makes it possible to work in the entire working range
of the scanner with the increased speed.
Note:
If this mode is enabled, the position of the region of interest is
fixed and is determined by the
Window top
parameter. The size of the
area is determined by the
Window height
parameter.
Window top
300
The position of the upper boundary of the region of interest in manual
mode. Valid values: from 0 to (488 -
Window height
).
Window height
64
The size of the region of interest. Valid values: from 24 to 480.
Required points
count
324
This parameter is active in the
Auto positioning
mode. It sets the
number of points in the profile, which indicates that the profile is
located within the region of interest. If the number of points in the
region of interest is less than the specified value, the scanner
automatically starts searching for the profile on the entire field of the
CMOS sensor (the region of interest expands to the entire CMOS
sensor with a corresponding change in speed). When the specified
number of profile points is detected, the scanner automatically returns
to the specified ROI size.
Valid number of points: from 1 to 648.
The size of the region of interest is determined by the
Window height
parameter. The
Window top
parameter is changed automatically.
15.4.3.2.3. "Network" panel
Parameter
Factory value
Description
Speed
-
Connection speed. Available modes:
·
100 Mbps;
·
1 Gbps.
Autonegotiation
ON
Automatic negotiation of connection speed.
Address
192.168.1.30
IP address of the scanner.
Netmask
255.255.255.0
Subnet mask.
