RF627Weld [Revision 1.1.1] 03.08.2020
Laser Seam Tracking System for Welding Automation. RF627Weld Series
5
1. Safety precautions
·
Use supply voltage and interfaces indicated in the scanner and controller
specifications.
·
When connecting / disconnecting cables, the power of the scanner and controller
must be turned off.
·
To obtain stable results, wait about 20 minutes after scanner activation to achieve
uniform scanner warm-up.
·
The scanner and controller must be grounded.
2. CE сompliance
The system has been developed for use in industry and meets the requirements of
the following Directives:
·
EU directive 2014/30/EU. Electromagnetic compatibility (EMC).
·
EU directive 2011/65/EU, “RoHS“ category 9.
3. Laser safety
Scanners belong to 2M laser safety class according to IEC/EN 60825-1:2014.
Scanners make use of an c.w. 660 nm or 405 nm or 450 nm or 808 nm wavelength
semiconductor laser. Maximum output power is 10 mW. The following warning label is
placed on the scanner housing:
The following safety measures should be taken while operating the scanners:
·
Do not target laser beam to humans.
·
Do not disassemble the scanner.
·
Avoid staring into the laser beam.
4. General information
The Seam Tracking System is designed to be used in robotic welding systems and
is intended to automatically control the position of the welding head during the welding
process.
5. Structure
The system includes the following components:
·
Laser scanner RF627Weld.
·
Riftek Lamia software.
·
Controller (optional).
·
Cables.
·
Calibration plate.
