T
echnical
B
ulletin
PAGE: 6/58
Model:
Taurus-C1 / P1
Date:
21-Oct-11
No.:
RD074026
< Guidance for Those Who Are Familiar with Predecessor Products \ Paper: Trays,
Transport, etc. \ Main Machine Specifications >
The following descriptions were revised.
Before the Revision
After the Revision
Paper Cooling Unit
The cooling belt has been reduced from four belts to a
single belt.
Paper Registration
The high-precision paper registration unit used in the D016
has been adopted for use in this machine.
The position of the paper in the paper path is corrected
twice by the paper registration unit in the main machine,
once to correct for skew in the sub scan direction and once
for side-to-side registration in the main scan direction.
Shift Unit
The visible springs at the top of the shift unit were weak in
previous machines. These springs have been replaced
with stronger springs.
Paper Cooling Unit
Previous machines have four belts in the paper cooling
unit. To improve the accuracy and efficiency of paper feed,
one large belt is used in these machines.
Paper Registration
The high-precision paper registration unit of earlier
machines has been adopted for use in this machine.
The position of the paper in the paper path is corrected
twice by the paper registration unit in the main machine,
once to correct for skew in the sub scan direction and once
for side-to-side registration in the main scan direction.
Shift Unit
The visible springs at the top of the shift unit were weak in
previous machines. These springs have been replaced
with stronger springs. The photo above shows the old
springs. The new springs are black.
< Guidance for Those Who Are Familiar with Predecessor Products \ Paper: Trays,
Transport, etc. \ Peripherals \ Decurl Unit>
The following description was deleted as it is irrelevant to the Decurl Unit.
“The purge unit (part of the previous Decurler Unit model) is a tray built into the left side of
the main machine.”
