T
echnical
B
ulletin
PAGE: 1/1
Model:
Taurus-C1/P1 (D074/D075/M044)
Date:
20-Jun-12
No.:
RD074076
Subject:
SP Setting for saddled-stitched booklets with
custom size paper
Prepared by:
K. Tsutsui
From:
1
st
PP Tech Service Sec., PP Tech Service Dept.
Classification:
Troubleshooting
Mechanical
Paper path
Product Safety
Part information
Electrical
Transmit/receive
Other ( )
Action required
Service manual revision
Retrofit information
Tier2
This RTB has been issued to announce the additional SP setting, which is required when
creating saddle-stitched booklets using custom size paper on the Booklet Finisher SR5040.
When creating saddle-stitched booklets using custom size paper in a print job run on the
Fiery controller, set SP5977-001 to “1”.
NOTE: The above SP setting is not required when creating saddled-stitch booklets on the
Plockmatic booklet maker.
