T
echnical
B
ulletin
PAGE: 1/2
Model:
Pro C651EX/Pro C751EX/ Pro C751
Date:
7-July-11
No.:
RD074016
Subject:
Manual Correction
(Replacement Guide:TCRU(ORU))
Prepared by:
T. Komori
From:
PP Service Planning Department 1G
Classification:
Troubleshooting
Mechanical
Paper path
Part information
Electrical
Transmit/receive
Action required
Service manual revision
Retrofit information
Product Safety
Other (
)
Tier 2
Please apply the following correction concerning the installing the cleaning unit for the
intermediate transfer belt in the Replacement Guide: TCRU (ORU).
5.2 Installing the Cleaning Unit for the Intermediate Transfer Belt
Incorrect Description
1. Mount the cleaning unit for the intermediate transfer belt (A) on its rails (B), and then
carefully push it in until it can go no further.
2. Reattach the black screw.
NOTE: Do not touch the levers and do not reattach the cover yet.
3. Remove the transfer unit. For details, see p.76 “Removing the Transfer Unit”.
4. Close the right drawer with the transfer unit detached.
5. Reconnect the power cord to the power source.
6. Turn the machine’s main power switch to ON, close the left and right front covers, and
then wait for the machine to warm up.
7. Access the Adjustment Settings for Skilled Operators menu. (See p.18 “Accessing the
Adjustment Settings for Skilled Operators”.)
8. Reset the replaceable parts counter for the replaced cleaning unit for the intermediate
transfer belt. (See p.20 “Resetting the Replaceable Parts Counter”.)
9. On the Adjustment Settings for Skilled Operators menu, press [0303: ITB Manual
Lubrication]
10. Press [OK] and wait for the operation to finish.
This operation takes about five minutes during which time a message appears on the
operation panel.
11. Open the left and right front covers.
12. Pull down both levers.
13. Reattach the cover with the two bracket screws.
14. Turn the machine off. (See p.14 “Power Off Sequence”.)
15. Lower the lever B5 and pull out the right drawer until it stops
16. Reattach the transfer unit. (See p.78 “Installing the Transfer Unit”.)