T
echnical
B
ulletin
PAGE: 29/58
Model:
Taurus-C1 / P1
Date:
21-Oct-11
No.:
RD074026
< Right Drawer \ LCIT Relay Sensor 2 >
Change in screw quantity
Before the Revision
After the Revision
2. Disconnect the sensor bracket [1] ( x1).
2. Disconnect the sensor bracket [1] ( x2).
< Right Drawer \ Double-Feed Sensor 1 (LED) >
Change in screw quantity
Before the Revision
After the Revision
2. Remove bracket [1] (
x2).
2. Remove bracket [1] (
x1).
< Right Drawer \ Double-Feed Sensor 2 (Receptor) >
Correction of screw quantity and type
Before the Revision
After the Revision
2. Disconnect the sensor bracket and remove the
sensor (
x2,
x1).
2. Disconnect the sensor bracket and remove the
sensor (
x1,
x1,
x1).
< Fusing Unit \ Before You Begin... >
“WARNING” note was added.
• The fusing unit can become very hot during normal operation.
•
Before removing the fusing unit, switch the machine off and wait at least 10 min. For the fusing unit
to cool so it can removed and handled safely.
