Ricoh IM 2500 Series, User Manual

Page: 267 / 400

Message Cause Solution and reference
"Hardware Problem:
Wireless Card" An error has
occurred in the
Wireless LAN
board. Turn off the power of the machine, check that the
Wireless LAN board is correctly installed in the
machine, and then turn on the power.
page 17 "Turning On and Off the Power"
If the message persists even after you have turned the
power off and then on, consider repairing the machine.
"HDD is full." The area reserved
for forms or fonts in
PostScript 3 is full. Delete a registered form or font that is no longer
necessary.
"HDD is full. (Auto)" An overflow error
occurred in the hard
disk while storing a
document printed
by Normal Print as
a Hold Print job by
the error job storing
function. • Reduce the size of the document to print.
• Erase documents that are no longer needed.
See "Deleting Documents Stored in the Machine",
User Guide (Full Version).
See "Erasing Documents from Document Server",
User Guide (Full Version).
"I/O buffer
overflow." An overflow has
occurred in the
receive buffer. • Reduce the transmission data.
• Increase the value in [I/O Buffer] on [Settings]
[Printer Settings] [Host Interface].
"Information for user
authentication is
already registered
for another user." In LDAP
authentication, the
same name is
registered under
different IDs on
different servers,
and duplicate
names (account
names) occurred
such as when
switching the
domain (server). Consult the user administrator. User administrator:
Delete the corresponding user from the address book,
and register the user again after resolving the duplicate
names on different servers.
"Insufficient
Memory" The amount of
available memory is
insufficient. Decrease [Resolution] in the printer driver.
See "Applying Different Print Settings Depending on the
Document Type", User Guide (Full Version).
When a Message Appears While Using the Printer Function
265