Ricoh IM 2500 Series, User Manual

Page: 269 / 400

Message Cause Solution and reference
"Paper size and/or
type mismatched or
no ppr. in Bypass
Tray." The paper size or
paper type
specified in the
printer driver does
not match the paper
settings, in the
machine, for the
bypass tray. Specify [Driver/Command] in [Settings] [Tray/
Paper Settings] [Printer] [Tray Setting Priority]
[Bypass Tray].
"Paper size and type
are mismatched.
Select another tray
from the following
and press
[Continue]. To
cancel job, press
[Job Reset]. Paper
size and type can
also be changed in
User Tools." The paper tray
loaded with paper
of the size or type
specified in the
printer driver is not
available. • To proceed with printing after changing the paper
setting, select a tray and press [Print]. When
Staple, Punch, Fold, Cover Sheet, Slip Sheet,
Chaptering, or Designate is specified, or when
Duplex printing is specified on a paper tray that
does not support the function, printing cannot be
performed. When Sort is specified, only one copy
of the document is printed.
• To proceed with printing on the specified paper,
load the paper and then check that the paper size
and type are correctly specified in [Settings]
[Tray/Paper Settings].
page 183 "Loading Paper into the Paper Tray"
"Parallel I/F board
has a problem." An error has
occurred in the
parallel interface. Turn off the power of the machine, wait for 10 seconds
or more after confirming that the main power indicator
is turned off, and then turn on the power.
page 17 "Turning On and Off the Power"
If the message persists even after you have turned the
power off and then on, consider repairing the machine.
"Printer font error." There is a problem
in the font file of the
machine. Consider repairing the machine.
"Print overrun." A page image is
discarded while
printing the page. Decrease [Resolution] in the printer driver.
See "Applying Different Print Settings Depending on the
Document Type", User Guide (Full Version).
When a Message Appears While Using the Printer Function
267