Ricoh IM 2500 Series User Manual Download

Page: 125 / 400

Click [IP], and configure the information of the machine.

DZX690

• Address: Enter the IP address of the machine.
• Protocol: Select [Line Printer Daemon - LPD]. If the printer takes time to perform operations

when using the [Line Printer Daemon - LPD] protocol, change the protocol to [HP Jetdirect -
Socket].

• Use: Check that the machine name is displayed. If "Generic PostScript Printer" is displayed,

the entered IP address may not be correct.

When "Generic PostScript Printer" is displayed even though the IP address is correct

Perform the following procedure to select the PPD file of the machine:

1. Select [Select Software...] on "Use".

Installing the Printer Driver for Network Connection (macOS)

123

Summary of Contents for IM 2500 Series

















































































































































































































































































































































































































Search results

Summary of Contents for IM 2500 Series

Reviews:

Related manuals for IM 2500 Series

Brands by name

Popular brands

Ricoh IM 2500 Series, User Manual

Search results

Summary of Contents for IM 2500 Series

Reviews:

Related manuals for IM 2500 Series

Brands by name

Popular brands