Chapter 7: Using the Command Line Interface
356
config:#
role create "<name>" <privilege1>;<privilege2>;<privilege3>...
If a specific privilege contains any arguments, that privilege should be
followed by a colon and the argument(s).
config:#
role create "<name>" <privilege1>:<argument1>,<argument2>...;
<privilege2>:<argument1>,<argument2>...;
<privilege3>:<argument1>,<argument2>...;
...
Variables:
<name> is a string comprising up to 32 ASCII printable characters.
<privilege1>, <privilege2>, <privilege3> and the like are names of the
privileges assigned to the role. Separate each privilege with a
semi-colon. See
All Privileges
(on page 356).
<argument1>, <argument2> and the like are arguments set for a
particular privilege. Separate a privilege and its argument with a colon.
All Privileges
This table lists all privileges. Note that available privileges vary according
to the model you purchased. For example, a PDU without the outlet
switching function does not have the privilege "switchOutlet."
Privilege
Description
adminPrivilege Administrator
Privileges
changeAssetStripConfiguration
Change Asset Strip
Configuration
changeAuthSettings
Change Authentication Settings
changeDataTimeSettings Change
Date/Time
Settings
changeEventSetup
Change Event Settings
changeExternalSensorsConfiguratio
n
Change External Sensors
Configuration
changeLhxConfiguration Change
LHX
Configuration
changeNetworkSettings Change
Network
Settings
changePassword Change
Own
Password
changePduConfiguration
Change Pdu, Inlet, Outlet &
Overcurrent Protector
Configuration
