Chapter 5: Using the Web Interface
214
Correctly Displaying the LHX Device
There are two ways to have the Dominion PX show the correct LHX model
in the web interface.
Auto detection: Set the mode of the Feature Port to Auto to let the
Dominion PX automatically detects the device type.
Manual assignment: Set the mode of the Feature Port to either
LHX-20 or LHX-40, depending on which LHX model is physically
connected to the Dominion PX.
For details on how to change the Feature Port mode, see
Configuring the
Feature Port
(on page 97).
After the correct LHX device type is detected or assigned, the LHX icon
appears below the Feature Port folder.
Note that the device icon changes its image when the device changes its
states. See
Device States and Icon Variations
(on page 218) for details.
Naming the LHX Device
To help identify an LHX heat exchanger in the Dominion PX web interface,
assign a name to it. The customized LHX heat exchanger's name is
followed by the Feature Port number in parentheses.
To name a heat exchanger:
1. If the Feature Port folder is not expanded, expand it to show the
device under the Feature Port folder. See
Expanding the Tree
(on
page 71).
2. Click the LHX heat exchanger in the Dominion PX Explorer pane. The
page specific to that device opens in the right pane.
3. Click Setup in the Settings section. A setup dialog appears.
4. Type a name for the heat exchanger in the Name field.
5. Click OK to save the changes.
