manualshive.com logo in svg

R&S FSW-K7, User Manual

The R&S FSW-K7 is a high-quality spectrum analyzer that provides accurate and reliable measurements. To access the User Manual for this product, simply download it for free from our website. This comprehensive manual offers detailed instructions on how to utilize the features of the R&S FSW-K7 effectively.

Share
Download
background image

Index

R&S

®

FSW-K7

398

User Manual 1173.9240.02 ─ 23

Average count ......................................................... 109, 136

Power sensor .............................................................. 86

Average mode

Traces ....................................................................... 135

Averaging

Traces (remote control) ............................................ 292

B

B2000

Activating/Deactivating ............................................... 79
Alignment .................................................................... 80
Connections ................................................................ 80
Remote commands ...................................................205
Settings ....................................................................... 79
State ........................................................................... 79

Band

Conversion loss table ................................................. 64
External Mixer ............................................................. 57
External Mixer (remote) ............................................ 195

Bandwidth settings .......................................................... 105
BB Power

Trigger (softkey) ..........................................................99

Bias

Conversion loss table ........................................... 61, 64
External Mixer ............................................................. 60
External Mixer (remote) .................................... 192, 193

Brochure ..............................................................................7

C

Calibration

External generator ...................................................... 37
External generator, remote ....................................... 235
Normalization, external generator ...............................77
Reference trace, external generator ........................... 38
Reflection open measurement, external generator .....77
Reflection short measurement, external generator ..... 77
Restoring settings, external generator .................. 39, 77
Storing results, external generator ..............................38
Transmission measurement, external generator ........ 76

Capture offset

MSRA / MSRT slave applications ............................. 106
MSRT slave applications .......................................... 106
Remote ............................................................. 371, 373
Softkey ...................................................................... 106

Capturing

I/Q data (remote) ...................................................... 294

Carrier

Offset .................................................................... 22, 26
Power ..........................................................................22

CCIR filter

AF filters ....................................................................118

CCITT filter

AF filters ....................................................................118

Center frequency .......................................................95, 115

Analog Baseband (B71) ..............................................70
Automatic configuration ............................................ 130
Displayed .............................................................. 11, 12
Softkey ................................................................ 95, 115
Step size ..................................................................... 95

Channel bar

Information, external generator ...................................43

Closing

Channels (remote) .................................................... 184
Windows (remote) .............................................303, 306

Comment

Limit lines .................................................................. 158

Compatibility

Limit lines .................................................................. 156

Conditions

Measurement .............................................................. 24

Configuration

Measurement (remote) ............................................. 187
Procedure ................................................................... 49

Connectors

AUX control, external generator ................................. 33
External generator control .......................................... 33
GPIB ........................................................................... 33

Continue single sweep

Softkey ...................................................................... 108

Continuous sweep

Softkey ...................................................................... 107

Conventions

SCPI commands ....................................................... 178

Conversion loss

External Mixer (remote) .................................... 197, 198

Conversion loss tables ................................................ 61, 62

Available (remote) .....................................................200
Band (remote) ........................................................... 199
Bias (remote) ............................................................ 199
Configuring ................................................................. 61
Creating ...................................................................... 62
Deleting (remote) ...................................................... 200
External Mixer ............................................................. 58
External Mixer (remote) .................................... 197, 198
Harmonic order (remote) .......................................... 201
Importing (External Mixer) .......................................... 62
Managing .................................................................... 61
Mixer type (remote) ...................................................202
Saving (External Mixer) .............................................. 65
Selecting (remote) .................................................... 202
Shifting values (External Mixer) .................................. 65
Values (External Mixer) .............................................. 65

Copying

Measurement channel (remote) ................................183

Coupling

Automatic, external generator ...............................41, 75
Frequencies, external generator ................................. 41
Input (remote) ........................................................... 189
Manual, external generator ......................................... 75
Trigger ...................................................................... 102

D

Data acquisition

MSRA/MSRT .................................................... 105, 251
Remote control ......................................................... 251
Settings ..................................................................... 105

Data format

ASCII ........................................................................ 316
Binary ........................................................................316
Remote ............................................................. 309, 311

Data sheet ........................................................................... 7
DB per division

Scaling ...................................................................... 120

DBW

see Demodulation bandwidth ..................................... 11

DC offset

Analog Baseband (B71, remote control) ...................211

Decimal separator

Trace export ..............................................................137

Summary of Contents for FSW-K7
























































































































































































































































































































































































































Reviews:

No comments

Related manuals for FSW-K7

MACROMEDIA FLASH 8-FLASH Tutorials Manual preview
FLASH 8-FLASH
Brand: MACROMEDIA Pages: 292
MACROMEDIA BREEZE 5 Manual preview
BREEZE 5
Brand: MACROMEDIA Pages: 26
MACROMEDIA BREEZE Installation Manual preview
BREEZE
Brand: MACROMEDIA Pages: 32
ITech IT9000 Installation Instruction preview
IT9000
Brand: ITech Pages: 22
Gallo Virtual Bass Amp Studio Devil User Manual preview
Virtual Bass Amp Studio Devil
Brand: Gallo Pages: 9
Novell LOGIN SCRIPTS Manual preview
LOGIN SCRIPTS
Brand: Novell Pages: 64
Casio EMULATOR FX-ES User Manual preview
EMULATOR FX-ES
Brand: Casio Pages: 18
ARRI Ramp Preview Controller Operation Manual preview
Ramp Preview Controller
Brand: ARRI Pages: 46
Red Hat DEVICE-MAPPER MULTIPATH 5.2 Configuration And Administration Manual preview
DEVICE-MAPPER MULTIPATH 5.2
Brand: Red Hat Pages: 44
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.2 Overview preview
CLUSTER SUITE FOR ENTERPRISE LINUX 5.2
Brand: Red Hat Pages: 78
Applied Biosystems Data Explorer 4 Series User Manual preview
Data Explorer 4 Series
Brand: Applied Biosystems Pages: 447
Lowrance Elite 5 Operation Manual preview
Elite 5
Brand: Lowrance Pages: 48
F-SECURE ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00 Administrator'S Manual preview
ANTI-VIRUS FOR MICROSOFT EXCHANGE 9.00
Brand: F-SECURE Pages: 174
AMX AMXUSBLAN Operation/Reference Manual preview
AMXUSBLAN
Brand: AMX Pages: 24
Cabletron Systems IRM-2/LM User Manual preview
IRM-2/LM
Brand: Cabletron Systems Pages: 36
IBM VIAVOICE 3-FOR MAC OS X User Manual preview
VIAVOICE 3-FOR MAC OS X
Brand: IBM Pages: 96
UMAX Technologies PowerColor User Manual preview
PowerColor
Brand: UMAX Technologies Pages: 127
Waves Plug-in for Vocals and Monophonic User Manual preview
Plug-in for Vocals and Monophonic
Brand: Waves Pages: 20

Brands by name

Popular brands

Load more brands