Remote Commands for Analog Demodulation Measurements
R&S
®
FSW-K7
186
User Manual 1173.9240.02 ─ 23
Application
<ChannelType>
Parameter
Default Channel Name*)
TD-SCDMA BTS (R&S
FSW-K76)
BTDS
TD-SCDMA BTS
TD-SCDMA UE (R&S
FSW-K77)
MTDS
TD-SCDMA UE
Transient Analysis (R&S
FSW-K60)
TA
Transient Analysis
VSA (R&S
FSW-K70)
DDEM
VSA
WLAN (R&S
FSW-K91)
WLAN
WLAN
*) the default channel name is also listed in the table. If the specified name for a new channel already
exists, the default name, extended by a sequential number, is used for the new channel.
INSTrument:REName
<ChannelName1>, <ChannelName2>
This command renames a measurement channel.
Parameters:
<ChannelName1>
String containing the name of the channel you want to rename.
<ChannelName2>
String containing the new channel name.
Note that you cannot assign an existing channel name to a new
channel; this will cause an error.
Example:
INST:REN 'IQAnalyzer2','IQAnalyzer3'
Renames the channel with the name 'IQAnalyzer2' to 'IQAna-
lyzer3'.
Usage:
Setting only
INSTrument[:SELect]
<ChannelType>
Selects the channel type for the current channel.
See also
For a list of available channel types see
Parameters:
<ChannelType>
ADEMod
Optional Analog Demodulation application.
SYSTem:PRESet:CHANnel[:EXEC]
This command restores the default instrument settings in the current channel.
Use
INST:SEL
to select the channel.
Example:
INST:SEL 'Spectrum2'
Selects the channel for "Spectrum2".
SYST:PRES:CHAN:EXEC
Restores the factory default settings to the "Spectrum2" channel.
Usage:
Event
Activating Analog Demodulation Measurements
