R&S FSW-K7, User Manual

Page: 300 / 407

Remote Commands for Analog Demodulation Measurements
R&S
®
FSW-K7
300 User Manual 1173.9240.02 ─ 23
11.6.1 General Window Commands
The following commands are required to configure general window layout, independent
of the application.
Note that the suffix <n> always refers to the window in the currently selected measure-
ment channel (see
INSTrument[:SELect]
on page 186).
DISPlay:FORMat
........................................................................................................... 300
DISPlay[:WINDow<n>]:SIZE
........................................................................................... 300
DISPlay:FORMat <Format>
This command determines which tab is displayed.
Parameters:
<Format> SPLit
Displays the MultiView tab with an overview of all active chan-
nels
SINGle
Displays the measurement channel that was previously focused.
*RST:
SING
Example: DISP:FORM SPL
DISPlay[:WINDow<n>]:SIZE <Size>
This command maximizes the size of the selected result display window temporarily .
To change the size of several windows on the screen permanently, use the
LAY:SPL
command (see
LAYout:SPLitter
on page 304).
Suffix:
<n>
.
Window
Parameters:
<Size> LARGe
Maximizes the selected window to full screen.
Other windows are still active in the background.
SMALl
Reduces the size of the selected window to its original size.
If more than one measurement window was displayed originally,
these are visible again.
*RST:
SMALl
Example: DISP:WIND2:SIZE LARG
11.6.2 Working with Windows in the Display
The following commands are required to change the evaluation type and rearrange the
screen layout for a measurement channel as you do using the SmartGrid in manual
operation. Since the available evaluation types depend on the selected application,
Configuring the Result Display