manualshive.com logo in svg

R&S FSW-K7, User Manual

Share
Download
R&S FSW-K7 User Manual Download Page 371

Remote Commands for Analog Demodulation Measurements

R&S

®

FSW-K7

371

User Manual 1173.9240.02 ─ 23

Note

: even if the analysis line display is off, the indication whether or not the currently

defined line position lies within the analysis interval of the active slave application
remains in the window title bars.

Suffix: 

<n>

.

irrelevant

Parameters:

<State>

ON | OFF | 1 | 0
*RST: 

1

Manual operation: 

See 

"Show Line"

 

on page 161

CALCulate<n>:MSRA:ALINe[:VALue] 

<Position>

This command defines the position of the analysis line for all time-based windows in all
MSRA slave applications and the MSRA Master.

Suffix: 

<n>

.

irrelevant

Parameters:

<Position>

Position of the analysis line in seconds. The position must lie
within the measurement time of the MSRA measurement.
Default unit: s

Manual operation: 

See 

"Position"

 

on page 161

CALCulate<n>:MSRA:WINDow<n>:IVAL?

This command queries the analysis interval for the window specified by the WINDow
suffix <n> (the CALC suffix is irrelevant). This command is only available in slave appli-
cation measurement channels, not the MSRA View or MSRA Master.

Suffix: 

<n>

.

Window

Return values: 

<IntStart>

Start value of the analysis interval in seconds
Default unit: s

<IntStop>

Stop value of the analysis interval in seconds

Usage: 

Query only

[SENSe:]MSRA:CAPTure:OFFSet 

<Offset>

This setting is only available for slave applications in MSRA mode, not for the MSRA
Master. It has a similar effect as the trigger offset in other measurements.

Analyzing Results

Summary of Contents for FSW-K7
























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands