R&S FSW-K7, User Manual

Page: 202 / 407

Remote Commands for Analog Demodulation Measurements
R&S
®
FSW-K7
202 User Manual 1173.9240.02 ─ 23
Parameters:
<Type> string
Name of mixer with a maximum of 16 characters
Example: CORR:CVL:SEL 'LOSS_TAB_4'
Selects the conversion loss table.
CORR:CVL:MIX 'FS_Z60'
Manual operation: See "Mixer Name" on page 64
[SENSe:]CORRection:CVL:PORTs <PortNo>
This command defines the mixer type in the conversion loss table. This setting is
checked against the current mixer setting before the table can be assigned to the
range.
Before this command can be performed, the conversion loss table must be selected
(see
[SENSe:]CORRection:CVL:SELect
on page 202).
This command is only available with option B21 (External Mixer) installed.
Parameters:
<PortType> 2 | 3
*RST:
2
Example: CORR:CVL:SEL 'LOSS_TAB_4'
Selects the conversion loss table.
CORR:CVL:PORT 3
Manual operation: See "Mixer Type" on page 65
[SENSe:]CORRection:CVL:SELect <FileName>
This command selects the conversion loss table with the specified file name. If
<file_name> is not available, a new conversion loss table is created.
This command is only available with option B21 (External Mixer) installed.
Parameters:
<FileName> String containing the path and name of the file.
Example: CORR:CVL:SEL 'LOSS_TAB_4'
Manual operation: See "New Table" on page 61
See "Edit Table" on page 62
See "File Name" on page 63
[SENSe:]CORRection:CVL:SNUMber <SerialNo>
This command defines the serial number of the mixer for which the conversion loss
table is to be used. This setting is checked against the current mixer setting before the
table can be assigned to the range.
Configuring the Measurement