R&S FSPN, User Manual

Page: 391 / 555

Remote Control
R&S
®
FSPN
391 User Manual 1179.4363.02 ─ 01
Manual operation: See "Defining the video bandwidth" on page 137
11.6.9.4 Trigger Configuration
TRIGger[:SEQuence]:DTIMe
...........................................................................................391
TRIGger[:SEQuence]:FREQuency
...................................................................................391
TRIGger[:SEQuence]:FREQuency:HYSTeresis
................................................................. 391
TRIGger[:SEQuence]:HOLDoff[:TIME]
..............................................................................392
TRIGger[:SEQuence]:IFPower:HOLDoff
........................................................................... 392
TRIGger[:SEQuence]:LEVel[:EXTernal<1|2>]
.................................................................... 392
TRIGger[:SEQuence]:SLOPe
.......................................................................................... 393
TRIGger[:SEQuence]:SOURce
........................................................................................393
TRIGger[:SEQuence]:DTIMe <Time>
This command defines the trigger drop-out time.
Parameters:
<Time> <numeric value>
*RST:
0
Default unit: s
Example: //Define a drop-out time
TRIG:DTIM 200MS
Manual operation: See "Defining a trigger drop-out time" on page 135
TRIGger[:SEQuence]:FREQuency <Frequency>
This command defines the trigger frequency.
Prerequisites for this command
●
Select the frequency trigger (
TRIGger[:SEQuence]:SOURce
).
Parameters:
<Frequency> <numeric value>
Default unit: Hz
Example: //Configure frequency trigger
TRIG:SOUR FREQ
TRIG:FREQ 1GHZ
Manual operation: See "Defining the trigger level and frequency" on page 134
TRIGger[:SEQuence]:FREQuency:HYSTeresis <Hysteresis>
This command defines the trigger hysteresis.
Prerequisites for this command
●
Select the frequency trigger (
TRIGger[:SEQuence]:SOURce
).
Common Measurement Settings