R&S FSPN, User Manual

Page: 311 / 555

Remote Control
R&S
®
FSPN
311 User Manual 1179.4363.02 ─ 01
11 Remote Control
● Conventions Used in SCPI Command Descriptions ............................................. 311
● Common Suffixes ..................................................................................................312
● Common Commands ............................................................................................ 312
● Selecting the Operating Mode and Application .....................................................316
● Measurements and Result Displays ......................................................................323
● Common Measurement Settings ...........................................................................337
● Common Analysis and Display Functions .............................................................402
● Managing Settings and Results ............................................................................ 450
● Configuring the R&S FSPN ...................................................................................477
● Using the Status Register ..................................................................................... 515
● Programming Examples ........................................................................................519
11.1 Conventions Used in SCPI Command Descriptions
Note the following conventions used in the remote command descriptions:
●
Command usage
If not specified otherwise, commands can be used both for setting and for querying
parameters.
If a command can be used for setting or querying only, or if it initiates an event, the
usage is stated explicitly.
●
Parameter usage
If not specified otherwise, a parameter can be used to set a value and it is the
result of a query.
Parameters required only for setting are indicated as
Setting parameters .
Parameters required only to refine a query are indicated as Query parameters .
Parameters that are only returned as the result of a query are indicated as Return
values .
●
Conformity
Commands that are taken from the SCPI standard are indicated as SCPI con-
firmed . All commands used by the R&S FSPN follow the SCPI syntax rules.
●
Asynchronous commands
A command which does not automatically finish executing before the next com-
mand starts executing (overlapping command) is indicated as an
Asynchronous
command .
●
Reset values (*RST)
Default parameter values that are used directly after resetting the instrument (
*RST
command) are indicated as *RST values, if available.
●
Default unit
The default unit is used for numeric values if no other unit is provided with the
parameter.
●
Manual operation
If the result of a remote command can also be achieved in manual operation, a link
to the description is inserted.
Conventions Used in SCPI Command Descriptions