Common Measurement Settings
R&S
®
FSPN
105
User Manual 1179.4363.02 ─ 01
●
Define a "Range" and a "Bottom" value. The "Top" value is adjusted accordingly.
●
When you change the "Top" or "Bottom" values only, the "Range" is adjusted.
●
When you change the "Range" only, the "Bottom" value is adjusted.
In addition, you can perform a single automatic scale adjustment with the "Auto Scale
Once" feature. When you do so, the R&S
FSPN selects the ideal scale for the current
measurement results, but will not update the scale for the next measurement.
Remote command:
Mode:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:AUTO
Top:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel
Bottom:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]:RLEVel:LOWer
on page 353
Range:
DISPlay[:WINDow<n>]:TRACe<t>:Y[:SCALe]
Selecting the unit of the y-axis
Baseband noise measurements allow you to select one of several units in which the
results are displayed.
You can select the desired unit from the "Y Axis Unit" dropdown menu.
Not available for all other measurements in the phase noise measurement application.
The units used by other measurements depend on the selected diagram and cannot be
changed manually.
Remote command:
DISPlay[:WINDow<n>]:TRACe<t>:Y:UNIT
6.4
Frequency
Access
(carrier frequency): "Overview" > "Frequency"
Access
(measurement range): "Overview" > "Noise Config" > "Noise Config"
Frequency settings allow you to control the characteristics of the measurement fre-
quency.
Frequency
