R&S FSPN, User Manual

Page: 164 / 555

Common Analysis and Display Functions
R&S
®
FSPN
164 User Manual 1179.4363.02 ─ 01
How to assign trace labels
Trace labels can be configured via the "Trace Labels" dialog box.
1. Turn on the trace label for a specific trace and assign a label in the corresponding
input field.
Note that a trace must be active. Otherwise assigning a label is not possible.
2. Move the trace label to any position on the display by dragging it to the new posi-
tion.
Remote command:
State:
DISPlay[:WINDow<n>]:TRACe<t>:LABel[:STATe]
on page 414
Label:
DISPlay[:WINDow<n>]:TRACe<t>:LABel:TEXT
on page 415
7.3.7 How to Configure Traces
● How to Export Trace Data and Numerical Results ................................................164
7.3.7.1 How to Export Trace Data and Numerical Results
The measured trace data and numerical measurement results in tables can be expor-
ted to an ASCII file. For each measurement point, the measured trace position and
value are output. The file is stored with a
.DAT
extension. For details on the storage
format, see Chapter 7.3.8.1, "Reference: ASCII File Export Format" , on page 165.
To export trace data and table results
Trace data can be exported from the "Trace" menu.
1. Press the [Trace] key, then select the "Trace Config" softkey and switch to the
"Trace / Data Export" tab.
2. Select "Export all Traces and all Table Results" to export all available measurement
result data for the current application. Alternatively, select a specific "Trace to
Export" .
3. Optionally, select the "Include Instrument & Measurement Settings" option to insert
additional information in the export file header.
4. If necessary, change the decimal separator used in the ASCII export file.
5. Select the "Export Trace to ASCII File" button.
6. In the file selection dialog box, select the storage location and file name for the
export file.
7. Select "Save" to close the dialog box.
8. Export the data to the file.
Trace Configuration