R&S FSPN, User Manual

Page: 189 / 555

Data Management
R&S
®
FSPN
189 User Manual 1179.4363.02 ─ 01
During recall, save sets of type "Instrument" replace the settings of the entire instru-
ment. All other save sets start a new channel with the stored settings.
Rename ← QuickSave 1 / ... / QuickSave 10
Displays an input field to rename the save set, if write protection is disabled.
Write Protection ← QuickSave 1 / ... / QuickSave 10
Enables or disables write protection for the save set. If enabled, the save set cannot be
renamed or overwritten.
Storage Type (Save only)
Defines which type of settings are stored in the save set.
"Instrument
with all Chan-
nels" The instrument settings for all currently active "Channel" s are stored.
"Current Chan-
nel" Only the instrument settings for the currently selected measurement
"Channel" s are stored.
Recall
Restores the instrument settings as saved in the selected settings file. If the settings
file contains settings for a specific "Channel" only, a new channel with the stored set-
tings is activated, otherwise all "Channel" s and instrument settings are overwritten
with the stored settings.
Note: After you use the "Recall" function, the history of previous actions is deleted, i.e.
any actions performed previously cannot be undone or redone using the [UNDO/
REDO] keys.
Remote command:
MMEMory:LOAD:STATe
on page 460
8.2.2 Configurable Storage and Recall
The more sophisticated storage and recall functions allow you to define which settings
are stored, and where the settings file is stored to. Any settings file can be selected for
recall.
● Stored Data Types ................................................................................................ 189
● Storage Location and Filename ............................................................................ 190
● Save and Recall Dialog Boxes ..............................................................................190
● Startup Recall Settings ..........................................................................................192
8.2.2.1 Stored Data Types
The following types of data can be stored to and loaded from files via the "Save" dialog
box on the R&S
FSPN:
Storing and Recalling Instrument Settings and Measurement Data