Getting Started
R&S
®
FSPN
24
User Manual 1179.4363.02 ─ 01
5. Select the instrument for display:
● "Display 1" : internal monitor only
● "Display 2" : external monitor only
● "Duplicate" : both internal and external monitor
6. Tap "Apply" to try out the settings before they are accepted permanently, then you
can easily return to the previous settings, if necessary.
7. Select "OK" if the settings are suitable.
3.1.10
Windows Operating System
The instrument contains the Microsoft Windows operating system which has been con-
figured according to the instrument's features and needs. Changes in the system setup
are only required when peripherals like a keyboard or a printer are installed or if the
network configuration does not comply with the default settings. After the R&S
FSPN is
started, the operating system boots and the instrument firmware is started automati-
cally.
Tested software
The drivers and programs used on the instrument under Microsoft Windows are adap-
ted to the instrument. Only install update software released by Rohde
&
Schwarz to
modify existing instrument software.
You can install additional software on the instrument; however, additional software can
impair instrument function. Thus, run only programs that Rohde
&
Schwarz has tested
for compatibility with the instrument software.
Preparing for Use
