manualshive.com logo in svg

R&S FSPN, User Manual, Page: 306 / 555

Share
Download
R&S FSPN User Manual Download Page 306

Network and Remote Operation

R&S

®

FSPN

306

User Manual 1179.4363.02 ─ 01

Windows will then map drives of the controller to the corresponding network drives.

9. To use printers connected to the controller while accessing them from the

R&S

 

FSPN, activate the "Printers" option. Do not change the remaining settings.

10. Open the "Display" tab.

The options for configuring the R&S

 

FSPN screen display are displayed.

11. Under "Remote desktop size", you can set the size of the R&S

 

FSPN window on

the desktop of the controller.

12. Under "Colors", do not change the settings.

13. Set the "Display the connection bar when I use the full screen" option:

How to Set Up a Network and Remote Control

Summary of Contents for FSPN












































































































































































































































































































































































































































































































































































Reviews:

No comments