R&S FSPN, User Manual

Page: 368 / 555

Remote Control
R&S
®
FSPN
368 User Manual 1179.4363.02 ─ 01
11.6.6.2 Residual Calculation Configuration
For manual operation, see Chapter 6.5.4, "Integrated Measurement Configuration" ,
on page 116.
CALCulate<n>[:RANGe<j>]:EVALuation:STARt
.................................................................368
CALCulate<n>[:RANGe<j>]:EVALuation:STOP
................................................................. 368
CALCulate<n>[:RANGe<j>]:EVALuation:TRACe
............................................................... 369
CALCulate<n>[:RANGe<j>]:EVALuation[:STATe]
...............................................................369
CALCulate<n>[:RANGe<j>]:EVALuation:WEIGhting
.......................................................... 370
[SENSe:]CORRection:WEIGhting:COMMent
.....................................................................370
[SENSe:]CORRection:WEIGhting:DATA
........................................................................... 370
[SENSe:]CORRection:WEIGhting:DELete
........................................................................ 370
[SENSe:]CORRection:WEIGhting:NAME
..........................................................................371
[SENSe:]CORRection:WEIGhting:SELect
.........................................................................371
CALCulate<n>[:RANGe<j>]:EVALuation:STARt <Frequency>
This command defines the start frequency of a custom integration range for residual
effects calculation.
Prerequisites for this command
●
Turn off integration over the complete measurement range (
CALCulate<n>[:
RANGe<j>]:EVALuation[:STATe]
).
Suffix:
<n>
.
Window
<j> Integration range
Parameters:
<Frequency> <numeric value>
Range:
Depends on the measurement range.
*RST: 1 MHz
Default unit: Hz
Example: See
CALCulate<n>[:RANGe<j>]:EVALuation[:STATe]
.
Manual operation: See "Defining the integration range" on page 117
CALCulate<n>[:RANGe<j>]:EVALuation:STOP <Frequency>
This command defines the stop frequency of a custom integration range for residual
effects calculation.
Prerequisites for this command
●
Turn off integration over the complete measurement range (
CALCulate<n>[:
RANGe<j>]:EVALuation[:STATe]
).
Suffix:
<n>
.
Window
<j> Integration range
Common Measurement Settings