R&S FSPN User Manual Download

Page: 494 / 555

Remote Control

R&S

FSPN

494

User Manual 1179.4363.02 ─ 01

SYSTem:DISPlay:LOCK

<State>

Defines whether the "Display Update" function remains available in remote operation
or not.

Parameters:

<State>

ON | OFF | 0 | 1

OFF | 0

The function remains available.

ON | 1

The function is not available and the display is not updated dur-
ing remote operation.
*RST:

SYSTem:DISPlay:UPDate

<State>

This command turns the display during remote operation on and off.

If on, the R&S

FSPN updates the diagrams, traces and display fields only.

The best performance is obtained if the display is off during remote control operation.

Parameters:

<State>

ON | OFF | 1 | 0
*RST:

Example:

SYST:DISP:UPD ON

Manual operation:

See

"Remote Display Update"

on page 284

SYSTem:ERRor:CLEar:REMote

This command deletes all contents of the "Remote Errors" table.

Note: The remote error list is automatically cleared when the R&S

FSPN is shut down.

Example:

SYST:ERR:CLE:REM

Manual operation:

See

"Display Remote Errors"

on page 285

See

"Clear Error List"

on page 289

SYSTem:ERRor:DISPlay

<State>

This command the error display during remote operation on and off.

If activated, the R&S

FSPN displays a message box at the bottom of the screen that

contains the most recent type of error and the command that caused the error.

Parameters:

<State>

ON | OFF | 1 | 0
*RST:

Example:

SYST:ERR:DISP ON

Configuring the R&S

FSPN

Summary of Contents for FSPN












































































































































































































































































































































































































































































































































































Search results

Summary of Contents for FSPN

Reviews:

Related manuals for FSPN

Brands by name

Popular brands

R&S FSPN, User Manual

Search results

Summary of Contents for FSPN

Reviews:

Related manuals for FSPN

Brands by name

Popular brands