Remote Control
R&S
®
FSPN
392
User Manual 1179.4363.02 ─ 01
Parameters:
<Hysteresis>
<numeric value>
*RST:
100 kHz
Default unit: Hz
Example:
//Define a trigger hysteresis
TRIG:SOUR FREQ
TRIG:FREQ:HYST 200KHZ
Manual operation:
See
"Defining a trigger hysteresis"
TRIGger[:SEQuence]:HOLDoff[:TIME]
<Offset>
Defines the time offset between the trigger event and the start of the measurement.
Parameters:
<Offset>
*RST:
0 s
Default unit: S
Example:
TRIG:HOLD 500us
Manual operation:
See
TRIGger[:SEQuence]:IFPower:HOLDoff
<Period>
This command defines the holding time before the next trigger event.
Note that this command can be used for
any trigger source
, not just IF Power
(despite the legacy keyword).
Parameters:
<Period>
Range:
0 s to 10 s
*RST:
0 s
Default unit: S
Example:
TRIG:SOUR EXT
Sets an external trigger source.
TRIG:IFP:HOLD 200 ns
Sets the holding time to 200 ns.
Manual operation:
See
TRIGger[:SEQuence]:LEVel[:EXTernal<1|2>]
<Level>
This command defines the external trigger level.
Prerequisites for this command
●
Select the external trigger (
Suffix:
<1|2>
.
1|2
Selects the trigger port.
Common Measurement Settings
