Making External/Internal Calls
Telephoning
63
Busy Display for Bundles and Routes on the
System Telephone
The system telephones can display whether all lines (trunks) of a bundle or a
route are busy.
To do this, you must programme a feature key (function key) for the system
telephone in the
Configurator
(in the
Telephony
:
Devices
:
System phones
menu, function “Bundle state” or “Route state”). This function cannot be
programmed on the system telephone itself. Contact your system adminis-
trator if necessary so that this feature key can be configured for you.
The name of the bundle or route and the number of busy channels appear in
the display. This display is constantly refreshed.
If the “Route state” function is programmed and you press this programmed
key briefly, the routing code will be dialled accordingly (e. g. “0”).
If all lines in the bundle or the route are busy, the LED on the programmed
feature key is illuminated.
Ending Calls
To end a call
If the person you are speaking to ends the call while you are in hands-free
mode, the busy tone for your telephone is switched off after a few seconds
and you can be reached again. This also applies if you were connected to the
other subscriber via your headset. The period of time after which the busy
tone is switched off is configured by the system administrator. All other calls
will be ended after 20 seconds if the handset is off the hook.
h
replace the handset or
T
press the disconnect key.
L
In hands-free mode, by pressing the hands-free/
open-listening key.
K
During headset operation, by pressing the headset key.
