Proximus Forum 5000 User Manual Download Page 62

Page: 62 / 154

Telephoning

Making External/Internal Calls

away. In order to reach internal subscribers, press the star key
twice

* *

before dialling the internal number.

For the System Administrator:

●

The code digit is defined in the

Configurator

, menu

Telephony

Trunks

Route

(Setting for the

External trunk

route).

●

Immediate external line seizure is set in the user group by means of the

Immediate external line seizure

authorisation (in the

Configurator

User Manager

User groups

Making an External Call

With Automatic Line Seizure

With Manual Line Seizure

Lift the handset (your call key is seized).

and/or

Press the particular call key (hands-free mode).

and/or

Press the headset key (headset operation requires that the
headset is switched on, see page 118).

Dial the external call number.

Lift the handset (your call key is seized).

and/or

Press the particular call key (hands-free mode).

and/or

Press the headset key (headset operation requires that the
headset is switched on, see page 118).

Dial the line seizure code digit (presetting:

) and then

the external call number.

Summary of Contents for Forum 5000



























































































































































Search results

Summary of Contents for Forum 5000

Reviews:

Related manuals for Forum 5000

Brands by name

Popular brands

Proximus Forum 5000, User Manual

Search results

Summary of Contents for Forum 5000

Reviews:

Related manuals for Forum 5000

Brands by name

Popular brands