Proximus Forum 5000 User Manual Download Page 54

Page: 54 / 154

Telephoning

General Functions

Muting

Pressing the muting key

deactivates the microphone during a call, and

the person at the other end of the line can no longer hear you. Press the key
again to switch the microphone back on.

Call-charge Display, Duration Display

If your network operator transmits call-charge information, and if you have
dialled an external number yourself, you will see the current amount of the
charge in the info line during or at the end of a call. The menu item

6 Charge

settings

in the

4 Phone settings

MenuCard lets you deactivate this or switch

to the duration display (see also

MenuCard “Phone Settings”

starting on

page 117).

Adjusting the Volume with the Plus/Minus Key

Use the plus/minus key

to adjust

●

the volume of the loudspeaker in hands-free/open-listening mode,

●

the volume of the handset during a call via the handset

●

or the volume of the headphone during a call via a headset.

When the telephone is in its idle state again, it reverts to the default menu
setting. You can change the default setting using the

1 Volume

menu item in

the

4 Phone settings

MenuCard (see also

MenuCard “Phone Settings”

starting

on page 117).

When you receive a call, you can use the plus/minus key to adjust

ringing tone volume. This setting is stored immediately (even without
pressing the

key) and will be active for all future calls.

Summary of Contents for Forum 5000



























































































































































Search results

Summary of Contents for Forum 5000

Reviews:

Related manuals for Forum 5000

Brands by name

Popular brands

Proximus Forum 5000, User Manual

Search results

Summary of Contents for Forum 5000

Reviews:

Related manuals for Forum 5000

Brands by name

Popular brands