Proximus Forum 5000 User Manual Download Page 130

Page: 130 / 154

Features and MenuCards

Main Menu

128

Note:

The option configured for transmitting your call number is only
considered by the system if your user group has the

display

phone number per connection

authorisation activated.

Contact

your system administrator regarding your valid author

isation.

Editing a Telephone Book Entry

Select one of the following options and confirm the
selection with the OK key:

●

Default

: You can decide before calling this call number

whether or not your call number is to be transmitted or
not (refer to the

MenuCard “Selection” in the Idle State

starting on page 58 chapter also).

●

yes

: Your call number is always displayed.

●

: Your call number is always suppressed.

If necessary, repeat the entry in order to configure the
display of your own call number for another call number of
the phone book entry. Terminate configuration by selecting
the

menu entry in the

Transmit number

MenuCard.

P O

To save the telephone book entry, select the

Save

item and press the OK key.

P O

In the

Phone book

MenuCard, select menu item

2 Edit

and

press the OK key.

P O

In the

Edit

MenuCard, select the desired telephone book:

Personal

Central

Company

. Press the OK key to confirm

your selection.

Z O

Enter the name next to

Name

or (for

Central

) the speed-

dialling number next to

Abbrev. no

. If there is no entry

matching your search, the list of entries will be displayed.
Select the desired entry. Press the OK key to confirm your
selection.

Summary of Contents for Forum 5000



























































































































































Search results

Summary of Contents for Forum 5000

Reviews:

Related manuals for Forum 5000

Brands by name

Popular brands

Proximus Forum 5000, User Manual

Search results

Summary of Contents for Forum 5000

Reviews:

Related manuals for Forum 5000

Brands by name

Popular brands